Application
The Odyssey-4E system is capable of stripping almost all magnet wire insulations from 30 AWG down to 58 AWG and smaller. The system can strip single wires or ribbons (bi-filar, tri-filar, twisted pair, etc).
In addition, the same laser source can be used to cut the individual wires enabling precision connectorization - with the highest accuracy strip lengths.
All Odyssey systems are capable of stripping polyimide-type enamel insulations found on catheter wiring and magnet wires. Note the laser will not strip fluoropolymers, such as PTFE or ETFE. Examples of wire types stripped:
- Polyurethane Enamel EW / EWF
- Polyester Enamel PEW
- Polyester-imide EIW
- Polyamide-imide
- Kapton
- ML
Specs
| Min. Outer Cable Diameter | 0.025 mm (0.001") |
| Max. Outer Cable Diameter | 0.25 mm (0.2") |
| Stripping Length Increments | 0.1 mm (0.01") |
| Strip types | Area ablation of enamel insulation plus cutting of conductors |
| Max. Stripping Length | 100 mm (4") |
| Speed | Up to 3000 mm/s (120"/s) |
| Cable Loading | Via fixture plate - up to 100 x 100 mm (4" x 4") stripped at once |
| Dimensions (H x W x D) |
Bench unit: 620 mm (24.41") x 200 mm (7.87") x 760 mm (29.92") Under bench unit: 730 mm (28.74") x 600 mm (23.62") x 630 mm (24.80") |
