Contact an expert: +44 (0) 144 384 1738

Automated Odyssey

Overview
For the optimum in productivity we offer custom automation solutions to allow you to get the most from your Odyssey laser wire stripping technology.

Wires are fed from a spool and maintained under strict tension control (< 5 gram variation). After stripping, depending on the configuration, wires are either respooled or cut and deposited into a feed tray or even rewound onto individual bobbins.

High performance wire feed systems guarantee no stress to the wire and allow for partial or fully unattended operation.

Application

Strip Types

The Odyssey system is capable of selectively stripping individual wires from a ribbon cable

automated-odyssey-1

​In addition, the same laser source can be used to cut the individual wires enabling some precision connectorization - with the highest accuracy strip lengths

Materials

All Odyssey systems are capable of stripping polyimide type enamel insulations found on catheter wiring and magnet wires. Note the laser will not strip fluoropolymers, such as PTFE or ETFE.

  • Polyurethane Enamel EW / EWF
  • Polyester Enamel PEW
  • Polyester-imide EIW
  • Polyamide-imide
  • Kapton
  • ML
  • etc.
Specs
Min. Outer Cable Diameter 0.025 mm (0.001")
Max. Outer Cable Diameter 0.25 mm (0.2")
Stripping Length Increments 0.1 mm (0.01")
Strip types Area ablation of enamel insulation plus cutting of conductors
Max. Stripping Length 50 mm (2")
Speed Up to 3000 mm/s (120"/s)
Cable Loading From a spool with various unload options
Dimensions (L x W x H) 1000 x 600 x 2000 mm (40 x 24 x 80")
Category:
Description

Enquiries and Sales

To find out more about the Automated Odyssey Wire Stripping Machine or your exact requirements, please get in touch with one of our experts today.

Call us on: +44(0) 144 384 1738 Send us a Message

You may also like…